City of Asheboro water quality

Updated 2026-10-22 · North Carolina · Affiliate disclosure

We read 9 results from City of Asheboro’s 2025 water quality report. No results over a legal limit; 2 above a health goal or guideline.

Serves about 27,472 people · Water system ID NC0276010 · Read the district’s 2025 report (opens in a new tab)

Open this district in the water lookupCompare with your own test results, see the district map and get matched filters.

Results from the 2025 report

Each number is copied from the district’s report and links to the page it’s printed on. Where the report lists several plants, wells or purchased water, the highest is shown.

ContaminantResultHealth goalLegal limitWhat it means
Chloriteaverage · range 0.36 to 0.69 · listed as a violation in the report · Distribution system · 2025 report, page 50.6 ppm0.05 ppm1 ppmAbove the health goal12x the health goal
Copper90th percentile of homes tested, 0 over the action level · sampled 2023 · Customer taps · 2025 report, page 40.4 ppm0.3 ppm1.3 ppm (action level)Above the health goal1.3x the health goal
Disinfection byproducts (TTHM)highest running annual average · range 20 to 38 · listed as a violation in the report · Distribution system · 2025 report, page 538 ppbNone set80 ppbBelow the legal limit
Fluorideaverage · range 0.58 to 0.91 · listed as a violation in the report · Treatment plant · 2025 report, page 50.73 ppm1 ppm4 ppmBelow the health goal
Lead90th percentile of homes tested, 0 over the action level · sampled 2023 · Customer taps · 2025 report, page 4Not detected0.2 ppb15 ppb (action level)Not detected
pHaverage · range 7.1 to 7.5 · Treatment plant · 2025 report, page 67.22——Normal range
Sulfateas reported · Treatment plant · 2025 report, page 636.6 ppm—250 ppm guidelineWithin the guideline
Turbidity (cloudiness)highest measured · listed as a violation in the report · Treatment plant · 2025 report, page 50.12 NTUNone set1 NTUBelow the legal limit
Sodiumas reported · Treatment plant · 2025 report, page 619.3 ppmNone setNoneNo health limit

Utility results describe the whole system, measured where water enters the pipes, not your tap. Your home’s plumbing can add lead or copper. 1 number we weren’t sure about is held back until a person checks.

EPA testing for PFAS and lithium

EPA’s own nationwide testing (UCMR 5) found these in City of Asheboro’s water between Jun 2024 and Mar 2025. These are EPA lab results, separate from the district’s report. Anything not listed was not detected.

  • PFOA10.2 pptFound in 1 of 4 samples · highest resultAbove the federal limit that takes effect in 2029 (4 ppt)
  • PFOS16.3 pptFound in 1 of 4 samples · highest resultAbove the federal limit that takes effect in 2029 (4 ppt)
  • PFHxS4.5 pptFound in 1 of 4 samples · highest resultNo federal limit in force for this one
  • PFBS8.4 pptFound in 1 of 4 samples · highest resultNo federal limit in force for this one

Source: EPA UCMR 5 occurrence data. The highest single result is shown; one high sample doesn’t mean every glass is that high.

What you can do

Nothing here is an emergency notice: if the district has a violation, it must tell customers directly. If you’d like to lower these at your tap, these are the treatments that remove them, and the catalog shows the models certified for each. Ranking is by certified removal; commissions never change the order.

Disinfection byproducts

Found: Chlorite

What removes it: Carbon block.

See filters that remove it

Copper

Found: Copper

What removes it: Reverse osmosis.

See filters that remove itWhat water filter removes lead?

PFAS ("forever chemicals")

Found: PFOA (EPA testing), PFOS (EPA testing)

What removes it: Reverse osmosis.

See filters that remove itWhat water filter removes PFAS?

More districts: North Carolina water quality · All states · Something look wrong? Tell us